The K-Design Award is sponsored and held by DESIGNSORI CO.,LTD, which eliminates the simplicity and complexity of modeling. It not only realizes the specificity of creativity through excellent design, but also gives products the potential of real value. Based on this goal, we expect designers, companies, design agencies and design studios to introduce the best design concepts, form excellent design forms, and produce creative works.
Small forklifts are generally used for cargo handling in small-scale work spaces. However, when faced with some special counterweight and flexibility requirements, traditional small forklifts have many problems that are not suitable. SPLIT FORKLIFT is a new type of compact and smart forklift that can be flexible and changeable. It is different from the previous integrated forklifts. The forklift is designed into two parts, namely the front and rear parts-the separate movable counterweight module part and the driving and operation Part, it has a flexible counterweight function and a step-climbing function that the integrated forklift does not have. This forklift is positioned as a small forklift with a large counterweight, which has changed that ordinary small forklifts cannot have the characteristics of high counterweight and flexibility at the same time. The SPLIT FORKLIFT forklift uses the principle of leverage. The rear counterweight module can be moved back to increase the forklift's counterweight, making it usable in a few high-load conditions. At the same time, the forklift has a dynamic balance monitoring system that can monitor the balance of the truck in real time. Under high load conditions, the tail counterweight module is automatically extended to prevent the forklift from overturning and ensure the safety of operators. The separate design of the SPLIT FORKLIFT forklift truck body also has the function of climbing steps. The rear part of the body can lift the front part and send it to the top of the step. Moving forward, the forklift goes up to the top of the steps to complete the step climbing. This function is aimed at driving obstacles in warehouses, factories, or municipal maintenance, and greatly improves the road passing capacity of small forklifts.
PSS applied Fire EvacuationIn the event of a fire in a high-rise building, effectively communicate fire information to employees, such as accurate evacuation routes and fire points. , Inspired by water droplets, is the source of fire fighting. It is reminiscent of the function of conveying information to the misunderstanding after fire detection, and the wave shape that propagates after the drop of water drops * to convey detailed information of fire information Fire notification and fire point information 2. Easy to use voice and punctuation, fire evacuation prompt information 3. Fire safety equipment location guide (fire extinguisher, anti-virus cotton, etc.) 4. Evacuation completed location and arrival time and distance 5. In an emergency, I Location transmission and rescue request 6. Real-time information about firefighter dispatch/fire fighting situation.
Ship bottom-Cleaning guard"Ship bottom-Cleaning guard" is designed from the perspective of improving energy efficiency. 85% of the world's cargo is completed by sea transportation. As the ship is immersed in sea water for a long time, a large amount of marine life will be adsorbed on the bottom of the ship. If it is not cleaned up in time, it will increase the weight of the ship and make the bottom of the ship uneven. This leads to an increase in sailing resistance and a sharp drop in speed. As a result, problems such as low energy use efficiency and increased pollution emissions are faced. "Ship bottom-Cleaning guard" is a ship bottom cleaning robot designed to solve the above problems. When there is too much adsorbed material at the bottom of the ship, the staff can send it to the bottom of the ship to clean up the adsorbed material. It first sucks in sea water and then cleans it through a high-pressure nozzle. This cleaning method is very clean and environmentally friendly. After being cleaned up, the ship can greatly improve energy efficiency during subsequent voyages.
In order to solve the current high center of gravity of jig saws and it is difficult to view the contact surface in real time, we must make breakthroughs in the structure and function of the product. The shaft structure can be better perpendicular to the working plane after 90 degrees rotation and can move vertically along the plane to be cut. Our purpose is to improve the practicality while making a structural breakthrough in the use of traditional tools. The beginner-friendly design enhances the ergonomic design and touch, providing users with greater grip and stability. The retraction guide at the front end of the drill helps the user determine the depth of the hole and provides an extra layer of stability for the shaking hand perpendicular to the working plane. In addition, the drill bit retracts into the guide device to facilitate collection and cleaning of debris. After storage, it is a complete minimalist shape. Beginners in the product use process can better adapt to our products, and we have enhanced the ergonomic design and tactility on the traditional bedside structure, providing users with a larger contact area and low center of gravity stability. In addition, we hope that The entire shape obeys the premise of functionality, and achieves the ultimate goal of rotating and portable. Design a safe and easy-to-use trajectory jig saw to cater to a broad audience of functional and aesthetic groups or individuals, from the first use to experienced professionals, to every DIY user, the safest Use our props most quickly.
This design abandons the traditional screwing method of the bulb, and combines the pressing structure of the ballpoint pen with the installation method of the bulb, making the process of removing and installing the bulb easier, faster and less labor-saving. The traditional bulbs used by people on the market need to be aligned with the interface when installing, and then screwed in along the direction of the thread until the threads are all stuck; when removing the bulb, you need to rotate the bulb in the opposite direction until the threads of the bulb and the socket are completely separated Can be removed. The cumbersome installation and disassembly of the bulb not only takes time, but the user will also have arm soreness due to maintaining a posture for a long time. Excessive force when installing the bulb can easily cause damage to the bulb and lamp holder, such as slippage and broken bulbs, which may cause electric shocks. Circumstances will not only cause material loss and even endanger life. Therefore, this design adopts the pressing method of a ballpoint pen to make the replacement of the bulb simple and fast. You only need to push the bulb directly into the lamp holder, and the structure on the top of the bulb will trigger the opening and the bulb will be stuck on the holder; remove the bulb At the same time, you only need to push up the bulb to fold the locking structure, and the bulb can be easily removed.
Comments
Post a Comment